Haier ESD400 User Manual download pdf (Page 17)

English

RINSE AID DISPENSER

Rinse aids prevent water from forming droplets that can dry as spots or streaks.

They also improve drying by allowing water to drain off of the dishes during the

final rinse by releasing a small amount of the rinse aid into the rinse water. Your

dishwasher is designed to use a liquid rinse aid. Do not use a solid or bar-type.

FILLING THE DISPENSER

The rinse aid dispenser holds 4.8 oz ( 145ml ) of rinse aid. Under normal

conditions, this will last for about three months. Rinse aid is released through an

opening in the dispenser. You do not to wait until the dispenser is empty to

refilled it. Try to keep it full, but be careful not to overfill it.

1. Make sure the dishwasher door is fully open.

2. Open the dispenser by pushing the cover latch.

3. Add rinse aid until the indicator window looks full.

4. Clean up any spilled rinse aid with a damp cloth.

5. Close the cover.

RINSE AID SETTING

The amount of rinse aid released into the final wash can be adjusted. The factory

rings or calcium ( hard water ) spots on dishes, try a higher setting.

TO ADJUST THE SETTING

Open the dispenser cover. Turn the adjuster inside the dispenser to the desired

setting .

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

No comments

Haier ESD400 User Manual Page 17