Haier HVF024BBG Datasheet download pdf (Page 6)

1. Remove all packaging material. This includes the foam base and all

adhesive tape holding the wine cellar accessories inside and

outside.

2. Inspect and remove any remains of packing, tape or printed

materials before powering on the wine cellar.

• Your wine cellar has two leveling legs which are located in the

front corners of your wine cellar. After properly placing your

wine cellar in its final position, you can level your wine cellar.

• Leveling legs can be adjusted by turning them clockwise to raise your

wine cellar or by turning them counterclockwise to lower

your wine cellar. The wine cellar door will close easier when the

leveling legs are extended.

• To assure your wine cellar works at the maximum efficiency it

was designed for, you should install it in a location where there

is proper air circulation, plumbing and electrical connections.

• The following are recommended clearances around the wine cellar:

Sides……………2 "(50mm)

Top....................2" (50mm)

Back..................2" (50mm)

• Do not over fill your wine cellar for proper internal air circulation.

Installing Your Wine Cellar

Unpacking Your Wine Cellar

Proper Air Circulation

Leveling Your Wine Cellar

English

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

No comments

Haier HVF024BBG Datasheet Page 6