Haier HT18TS45SW Manual download pdf (Page 13)

10. Remove the bottom hinge by unscrewing the

bolts mounting it to the cabinet.

NOTE: It is easier to remove and re-install the

bottom hinge pin while the hinge is itself is

still attached to the cabinet.

RE-INSTALLING THE HINGES AND

DOORS

1. Unscrew the bottom hinge pin and re-locate

it to the opposite hole on the top of the hinge.

(Fig. 13)

2. Attach the bottom hinge spacer and bottom

hinge to the cabinet using the bolts originally

provided. Be sure to use the top two mounting

holes on the hinge and the bottom hole on the

same side that the hinge is being moved to.

3. Flip the center hinge according to the diagram

below and attach the hinge spacer and hinge to

the cabinet. (Fig. 14) Do not install the center

hinge pin yet.

4. Remove the top thimble cover on the hinge side

of the refrigerator door and relocate it to the

opposite thimble hole. Use both hands to mount

the door on bottom hinge pin, making sure the

pin goes fully into the bottom thimble hole.

When the top thimble hole is aligned with the

hole in the center hinge, place the hinge pin into

the hole, threaded end down, and tighten.

Do Not Over-Tighten

5. Remove the top thimble plug on the hinge

side of the freezer door and relocate it to the

opposite thimble hole. Place the door onto the

center hinge pin, being sure that the pin goes

fully into the bottom thimble hole. Tape may be

used as it was during the removal steps to hold

the door in place during the next step.

6. Place the top hinge pin into the thimble hole on

the same side as the lower hinges.

PAGE 11 • SET UP & USE

ENGLISH

REVERSING THE DOOR CONT.

Fig. 12

Fig. 13

Fig. 14

Thimble Hole

Fig. 15

Fig. 16

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 71 72

Comments to this Manuals

No comments