Haier HPIM35W User Manual download pdf (Page 10)

English

Troubleshooting Guide

Problem Possible Causes Solution

The compressor

makes a buzzing

noise when the

machine is on.

The voltage is lower than

required. This unit requires a

minimum of 120 volts.

Turn off the icemaker. Make sure the voltage is

120v and restart.

The LCD display

shows “POUR”.

There is no water in the water

storage tank or the water

level is too low.

The filter is blocked.

Fill the water storage tank with water and

restart the unit.

Clean the filter with a soft, flexible toothbrush.

The LCD display

shows “FULL”

There is too much ice in the

ice storage basket.

The temperature is too low.

Remove some ice from the ice storage basket.

Place the icemaker in a warmer place.

There is no display

on the LCD screen.

The fuse is blown. Replace the fuse.

The ice cubes are

fusing together.

The ice-making time is too

long.

The water temperature in the

inner liner is too low.

Stop the machine and reset the ice-making

time. Start the machine after the ice block

melts.

Replace the water in the inner liner. The sug-

gested water temperature is 44.6˚ to 77˚F.

Water is not freezing

during the normal

ice-making cycle.

The refrigerant is leaking.

There is a block in the refrig-

erating system.

Contact an authorized service center.

9

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments