Haier HWM45-10B User Manual Page 1

Fully Automatic Washing Machine User's manualThis manual is forPlease read this manual carefully before using. Retain it for future referenc

Ï´Ç°×¼±¸Preparation before washingConfirm if there's specialrequirement for the laundries.Clear the pocket.Take out the coins , sand,ha

The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or s

Ï´µÓ˳Ðò Use the operation buttonsThe user selects a suitable water level depending on the load." WATER LEVEL"buttona.Description of the fu

b.Operating procedure and explanations for the buttonsPOWERON/OFFSTARTPAUSEPROGRAMRESERVATIONWATER LEVEL SOAK WASHRINSESPINPROCEDURE STATUSPROGRAM S

Even there's no water in the tub, the spinning will start after a certain period.Do not use soak process for woolen laundries. Wash the laundries

After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time

CleanAfter using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.When

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again

×°Ïä˵Ã÷User's manualNameComponents of the water inlet hoseBottom plateTapping screws One pieceFive piecesOne setQuantityFully automatic washing

Names of the parts...1Safety precautions ...

Meaning and description of the symbolsNames of the partsWarning signForbidden signContents marked with that symbol are related to the safety of t

Safety precautionsDo not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press ornip it with weight. If the power cord

Safety precautionsDo not decompose, repair or alter themachine by yourself.Do not put any hot or heavy items (such as the kettle with hot water )

Installation and adjustmentThe largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstab

How to change the direction of the drain hose1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost

Water tap,suitableWater tap,not suitableIt is required that the front end shall be longer than 10mm.The outlet end surface of the tap shall be flat an

1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please cont