Twin-tub Washing Machine User's manualThis manual is forHWM60-15PPlease read this manual carefully before using. Retain it for future reference
8Washing sequenceWash Spin timerWash timer Wash selectorBuzzer Water-filling entrance(To set to below 2 minute,first set to 6 minute thenturn it back.
9Midway spinningPushPushProper ProperOuter cover of The spin tubInner cover of The spin tubThe laundriesare slantingGlandNo gland(1) Open the outer c
Rinse with stored waterRinse with water-filling1. Put the laundries into the wash tub. Select suitable current according to the laundries.2. Fill
1. Put the laundries into the spin tub evenly and smoothly.2. Press the gland in the tub properly. Close the inner and outer cover of the s
12After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the
13Wipe the complete unit with soft cloth twisted dry.Wipe with neutral detergent if too dirtyDo not wash it directly by waterCleaning the overflow fil
14When the remained water is frozenPrevent the freezing (be sure to discharge the water completely after using) After complete draining, set the &qu
15(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please
16Water inlet hoseGlandLint filterPacking listTwin-tub washing machineNameQuantityUser's manualOne pieceOne pieceOne pieceOne pieceOne setWater
ContentsSafety precautionsInstallation and adjustmentPreparation before washingThe musts in washingUsage of the detergent Washing sequenceDisposal
1Meaning and description of the symbolsWarning signForbidding signContents marked with that symbol are related to the safety of the product and
2Safety precautionsPlease insert the power cord into special receptacle with rated vol-tage.Be sure to use single-phase three pins receptacle.The ear
3Do not stretch hands into the working machine. It is dangerous even if therotation is slow. Take special care of the children. Safe
Overflow filterLint filter<10cm4Installation and adjustmentPlease install and adjust the machine according to the requirement ofthe manual. It is
5Extend the drain hose from the rear sideHow to change the direction of the drain hosesFigure 1 indicates the leave factory installationposition
6Preparation before washing1.Connect the water inlet hose.2.Confirm that the washing machine is earthed reliably . Then insert the power plug int
7The capacity of washing and spinning of the machine refer to the largest weight of thestandard laundries under dry condition that can be washed
Comments to this Manuals