Haier HDC10SS User Manual download pdf (Page 7)

English

BEFORE USING FOR THE FIRST TIME

1. Unpack the unit.

2. Check the contents against the accessories list.

3. Remove all labels and the protective film.

4. Select a suitable location for the unit on a flat, stable surface close to

a power outlet.

Check to ensure all accessories are included and the unit is not dam-

aged. Be sure the filter and filter basket are assembled properly. Before

your first brew cycle, you will need to cycle the unit twice with water to

remove any sediment. Brew clean water by filling the reservoir up to the

MAX marker and follow the steps below (but do not use ground coffee

at this time), then pour the cycled water out of the carafe. Repeat 2

times. Remove and Clean carafe, Lid, Filter and filter basket thoroughly

with warm water.

OPERATION

Making Coffee

1) Open the flip up lid of coffee maker, use the carafe to fill the water

reservoir with cold water. Watch the left or right water level indicator

for your desired fill level. The water level should between the MAX

and MIN.

2) Place the filter basket in the filter basket in the unit. Make sure it is

properly seated. Then place the filter into the filter basket.

3) Add ground coffee to filter. One level tablespoon for every cup is

recommended, but you may adjust according to your personal taste.

4) Place the carafe on warming plate.

Note: Please make sure the carafe is properly seated on to the

warming plate.

5) Plug the power cord into the outlet, the LCD will

display “AM 12:00” (fig.1).

6) Press the “ON/OFF” button, the “RUN” indicator

lamp will now be illuminated. The brewing cycle

will now begin.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Haier HDC10SS User Manual Page 7