Haier HWM10-01 User Manual download pdf (Page 4)

Safety precautions

Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not

press or nip it with weight. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified person in order to avoid a

hazard. Keep the pin of the power plug clean, if the power plug is polluted with

dust, please wipe with dry cloth carefully. If the power cord or the power plug is

bad, to avoid risk it is required to have it replaced by the technicians of our

special shop or the after-sale service department.

The power cord plug should be

convenient to be pluged in or pluged

out with hand while the washing

machine runs normally. Be sure to pull

the plug out and close the water tap

when the machine is idle, when

moving the machine, or when cleaning

the machine. Do not use wet hand to

insert or pull out the power plug.

Do not let the machine share one

receptacle with other electric appliances.

If the power plug is damaged, or the

plugging into the receptacle is loose,

do not use the plug any more.

Do not wash water-proof laundries like

the raincoat, bike covers etc.

Do not use water hotter above 50 C .

Do not put the machine at damp place like

the bathroom. Never wash it with water.

Not put wet laundries on the control panel.

Please insert the power cord into special

receptacle with rated voltage. Be sure to

use single-phase three pins receptacle.

The earthing terminal of the receptacle

must be earthed reliably. If possible,

please adopt electric leakage protector.

1 2 3 4 5 6 7 8 9 10 11

No comments

Haier HWM10-01 User Manual Page 4