Haier HT18TS45SW User Manual download pdf (Page 12)

DOOR SWING REVERSAL

On black or white models, the door hinges and

handles can be reversed to accommodate your

needs.

NOTE: Door reversal is not available on stainless

steel door models.

REMOVING THE HANDLES

Please refer to the appropriate Door Handle

Installation section to determine how to remove

the handles from your refrigerator.

REMOVING DOORS AND HINGES

1. Use adhesive tape to secure both sides of the

freezer and refrigerator doors to the sides of the

cabinet. (Fig.6)

2. Remove the hinge cover screw and the top hinge

cover. (Fig. 7)

3. Remove the two bolts that mount the top hinge

to the cabinet and then remove the hinge by

raising it vertically. (Fig. 7)

4. Carefully remove the adhesive tape holding the

freezer door to the cabinet while holding the

door to the cabinet.

5. Remove the door by (a) pulling the top of the

door away from the cabinet and (b) lifting it at

the same time. (Fig. 8)

6. Move the door stop on the bottom of the door

to the opposite side and secure with original

screws, then place the door aside.

7. Unscrew the center hinge pin by rotating

counterclockwise, being careful not to lose the

spacers from the top section of the pin. (Fig. 10)

8. Remove the refrigerator door in the same

manner as the freezer door, first removing

the tape and then lifting up and away from the

cabinet. (Fig. 10) Relocate the door stop on the

bottom of the door to the opposite side of the

door. (Fig. 9) Place the door aside.

9. Remove the center hinge and spacer. (Fig. 11)

REVERSING THE DOOR

PAGE 10 • SET UP & USE

ENGLISH

Hinge Cover Screw

Hinge Cover

Bolts

Top Hinge

Thimble Hole

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Fig. 11

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comments to this Manuals

No comments

Haier HT18TS45SW User Manual Page 12

Comments to this Manuals

Related products and manuals for Freezers Haier HT18TS45SW