Haier HDY-D70 User Manual download pdf (Page 6)

Electrical connection (UK ONLY)

For your safety please read the following information

Warning: This appliance must be earthed.

The appliance must be connected to a 220 volt 240 cycle AC supply by

means of a three pin socket, suitably earthed and should be protected by a

13 amp fuse.

The appliance is supplied with a standard 3 pin mains plug ﬁtted with a 13

amp fuse. Should the fuse require replacement, it must be replaced with a

13 amp fuse approved to BS1362.

The plug contains a removable fuse cover that must be reﬁtted when the

fuse is replaced. In the event of the fuse cover being lost or damaged, the

plug must not be used until a replacement cover has been obtained.

When disposing of the appliance the plug should be cut off as close to

the plug body as possible and the fuse should be removed to prevent an

electrical hazard. Dispose of the plug safely.

The use of adapters, multiple connectors and/or extension cables is not

recommended.

How to wire a 13 amp plug.

Important

The wires in the mains lead on this

appliance are coloured in accordance with

the following code:

Green and Yellow – Earth

Blue - Neutral

Brown - Live

As this may not correspond with your installation, proceed as follows:

The green and yellow wire must be connected to the terminal in the plug

which is marked with the letter E or with the earth symbol ~ or coloured

green and yellow,

The blue wire must be connected to the terminal marked N.

The brown wire must be connected to the terminal marked L.

Safety instructions

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Haier HDY-D70 User Manual Page 6