Haier HLP24E Use and Care Manual download pdf (Page 13)

STEP 4 - LEVEL THE WASHER

IMPORTANT: Proper leveling of the washer will help reduce noise and vibration.

1. Placewasherinitsnallocation.Checkthatthewateranddrainlinesarenot

strainedorpinched.Makesurethatallfourfeetarermlyincontactwiththe

oorandthatthewasherrestssolidlyinposition.

2. Using a carpenter’s level, check to make sure the washer is level from side to

side and from front to back.

3. If the washer is not level, adjust the leveling feet. Turn clockwise to extend (raise

the washer) or counterclockwise to retract (lower the washer).

Raise Lower

STEP 5 - COMPLETE INSTALLATION

1. Plug the washer into a grounded 3 prong outlet.

2. Check that water faucet is turned on.

3. Dispose of/recycle all packaging materials.

4. Run a normal wash cycle using detergent to test and

clean the washer. See the ”Operating Instructions”

section.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 69 70

No comments

Haier HLP24E Use and Care Manual Page 13