Haier Washer HWM100-828A User Manual download pdf (Page 7)

<10cm

<1.5m

> 30mm

The drainage shall be smooth with the drain hose.

1.The height of the drain hose shall be less than

10cm, or the drainage will not be smooth, and

cost such long time that the machine may stop

at mid way.

2.Do not step on or press the drain hose.

4.If extra drain hose is needed, please make

separate purchase. The inner diameter of the

extra hose shall not less than 30mm, and the

length shall not exceed 1.5m.

3. If the drain hose is too long, cut it at mid point.

To make smooth drainage, cut the front end of

the hose slantingly.

Usage the drain hose

5.If the extra hose is too long, cut it either at A

or at B.

The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in

unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal:

Hang the lead line to check if it is

horizontal.

Adjust the adjustable leg:

Fasten

Loosen

High

Low

the adjustable nut

the adjustable leg

1 .To twist the adjustable leg, please first lift up the

side of the leg slightly, loosen the adjustable nut,

and twist the leg.

2 . After adjustment, fasten the nut.

Adjust the Installation position

1312

For the MEMORY,BLANKET,CHILD,STANDARD programs push the RINSE botton light

select the rinse times Overflow rinse.1.2.3.

is flashing ,

then push

Press the Wash button to select a wash time, from the MEMORY,BLANKET, CHILD ,SPEEDY, STANDARD

programs.

Press the Wash button can select or cancel the process of wash ,but can not change time from

the SILK programs.

The button is unavailable from the SPEEDY and WOOL programs.

"WASH " button

Press the button to select spin time, from the MEMORY,BLANKET,JEAN,STANDARD program."SPIN "

Press change time

from the SILK programs.

"SPIN"buttoncan select or cancel the process of spin ,but can not

E "SPIN " button

WATER

Common, memory and standard procedures for washing machine automatically detects the amount of cloth,

the water level is automatically set to 4.6.8 in an appropriate level. Into the wet clothing, may be set to "8" level,

the user needs to choose the appropriate level.

Due to different levels of wet and dry cloth to determine the actual water level may be different;

During the period of "washing" and "rinse", hold down the "water" button fill water, hand release or overflow water

to stop when reached the water level.

Wool, silk program level only can be choosen between 4-8 level, blanket water level of the program to

select between 2-5

LEVEL

F WATER LEVEL button""

G button" RYING" D "

Push the "AIR DRY" button to select air dry procedure. The program is chosen(0.5h 1.0h 2.0h).

0.5 1.0h The purpose is drying the inner tub and the outer tub, which can avoid growing

mildew on the outer tub and the inner tub.

2.0h can dry laundries The max drying capacity of the fibre laundrie is 2.0 kg.

"AIR DRY"program can not be reserved

AIR DRY

The button is unavailable from the SPEEDY and TUB DRY programs.

For ECONOMY ,WOOL programs, press can not change time"RINSE"button

G button"AIR DRY"

H button"RINSE"

WASH

SPIN

RINSE

The button is unavailable from the SPEEDY and WOOL programs.

If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .

Washing machines began to work, to manually change the level, press the "start pause" button re-select.

In common, strong, children, standards, and the memory process, the rinse water when washing the water level

higher than that of a file (the highest water level and artificial selection, except when rinse water)

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Haier Washer HWM100-828A User Manual Page 7

Comments to this Manuals

Related products and manuals for Washing machines Haier Washer HWM100-828A