Haier HAPE200 User Manual download pdf (Page 8)

English

Filter Life Counters

The carbon pre-filter and TrueHEPA filters are essential components for the

long term effectiveness of your air purifier. Your air purifier has two Filter Life

Counters, one for each filter type. These filter counters will monitor the percentage

of useful life your filter has left, and notify you when it is time to change your

filters. The exact useful life of your filters depends on your environment, but the

table below gives typical life span of filters.

The display shows the percentage of life used since the counter was reset.

NOTE: The percentage level increases in 10% increments.

The filter life function stores data in the air purifiers memory. The unit may be

unplugged and moved or stored without losing the Pre-Filter and Filter Counter

values.

To properly track filter usage, the Carbon Pre-Filter and HEPA Filter Life Counters

should be reset each time the filters are changed. Refer to Changing the Pre-Filter

or Changing the Filter for instructions on how to reset counters.

Filter Type Typical Usage

Active Carbon Pre-Filter 4000 Hours

TrueHEPA Filter 8000 Hours

fig. 8- Remote Control: Model HAPE300

Remote control must be used in direct line of sight

with air purifier. Basic functions can be conveniently

operated with the remote control, except initializing

the Child Lock Keypad feature. This must be done

manually on the unit.

IMPORTANT: You must pull the small paper insert

out of the remote control at bottom,

for remote control to work. You may

throw away this insert after removing.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

No comments

Haier HAPE200 User Manual Page 8