Haier HCR2250AGS User Manual download pdf (Page 14)

For example: If cooking time takes 45 minutes and you want to nish cooking at

6:00.

1. Press the function button repeatedly until the bar above Cook Time ashes and

set the cooking time 45 minutes.

2. Press the function button repeatedly until the bar above End Time ashes and

set the nish time to 6:00.

After the above setting, the current time is displayed and the bars above Cook Time

and End Time will ash indicating that the automatic cooking feature is set. When

the clock displays 5:15, the oven will start cooking automatically, and the Cook Time

bar will ash.

COOKTOP USE

Read the instructions before installing or using this appliance.

1. This appliance shall be installed in accordance with the regulations in force and

only used in a well-ventilated space.

2. The use of a gas-cooking appliance results in the production of heat and

moisture in the room in which it is installed. Ensure that the kitchen is well

ventilated: keep natural ventilation holes open or install a mechanical ventilation

device (mechanical extractor hood).

3. Prolonged intensive use of the appliance may call for additional ventilation,

for example opening of a window, or more eective ventilation, for example

increasing the level of mechanical ventilation where present.

IGNITION AND OPERATION OF THE BURNERS

In order to ignite a burner, push down on the knob while rotating it counterclockwise,

until the knob indicator is aligned with the ignite icon .

For models with a safety valve - Once the ame is lit, hold the knob depressed

for about 3-4 seconds until the device keeps the burner automatically lit. If the

burner fails to ignite, wait one minute for the gas to dissipate before attempting to

reignite. Adjust the ame intensity by rotating the knob counterclockwise from MAX

(maximum) to MIN (minimum).

To turn o the burner, rotate the knob clockwise until the indicator on the knob is

aligned with OFF.

POWER FAILURE

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit

match near a burner and turn knob counterclockwise until the indicator is aligned

with MAX. After the burner is lit, turn knob to desired setting.

In the case of unintentional ame extinguishing, the safety valve intervenes by

shutting o the gas to the burners.

The electric igniter must not be actuated for longer than 15 seconds. Should the

burner not light, or should the burner be unintentionally turned o, immediately

close the burner, and wait at least 1 minute before repeating. Once ignited, adjust

the ame as desired.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

No comments

Haier HCR2250AGS User Manual Page 14