Haier GDZ22-2 User Manual download pdf (Page 10)

After powering on, the clothes dryer automatically sets dryness at "More Dr y",

which means the normal drying time. If other drying time is desired, press

"Dryness Level" button to select a shorter time.

3. Press "Dryness Level" button to select a suitable drying time

After switching on, the dryer sets corresponding temperature adapting to

different program selected. If other drying temperature is wanted, press

"Temp" button to enable such a selection.

4. Press "Temp" button to set a suitable drying temperature

5. Press "Cycle Signal" button, you will be reminded up upon

end of a cycle

After switching on, the dryer automatically sets buzzer at "Softer", while the

user may define three prompt sound conditions "Louder", "Softer" and "Off".

6. Press "Delay Start" button to select a suitable reserved drying

program

After powering on, the dryer delay start drying program automatically sets as disabled.

When you desire a drying cycle ends at a delay time, press "Delay Start" button to

set delay start drying program. After initial pressing, the nixie display indicates 3 hrs,

which will be increased until 24 hrs by an increment 1 hr with every pressing. Press

again will display drying time. Here if press again, it will repeat from 3 hrs. If keep

pressed for 1.5 s, nixie display will increase continuously.

When "Delay Start" is enabled, your selected program indicator turns off while

"Delay Start" indicator and remaining reservation time indication turn on. During

reserved period, pressing "Delay Start" button can indicate reserve status.

To change operating program or cancel delay, you should cut off the supply and

re-select.

7. Press "Wrinkle Care" button to select wrinkle-proof drying mode

Wrinkle Care automatically sets "Off" upon powering on. Press "Wrinkle Care"

button, it sets wrinkle Care drying mode.

Notes: "Wrinkle Care" function is provided to match "Delay Start" program. When

"Delay Start" drying cycle ends, clothes remained in hot drum is prone to creasing.

"Wrinkle Care" function operates in tumbling clothes by intermittently rotating drum

to avoid clothes wrinkling.

8. Press "Start/Pause" button

If starting the machine, firstly close the front door and then press this button.

If pause is needed during machine operating, press this button. Pressing again will

resume operation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Haier GDZ22-2 User Manual Page 10