Haier HC32SA42SW Use and Care Manual download pdf (Page 9)

English

NOTE: As the door gets pressed in during shipping, after reversing the door, the

gasket may have to be reset. This is done to prevent the cool refrigerated

air from escaping. If there is a gap between the door gasket and the

cabinet, set the gasket by gently pulling it out to seal the gap.

Door Alignment

1. Remove the top hinge cover.

2. Loosen the top hinge screws using a phillips head screwdriver.

3. Adjust the door or put a spacer in between and then tighten the screws.

4. Replace the top hinge cover.

REFRIGERATOR FEATURES AND USE

General Features

Adjustable temperature dial:

Your refrigerator will automatically maintain the temperature level you select.

The temperature control dial has 7 settings plus "0". 1 is the warmest. 7 is the

coldest. At first, set the dial to 4 and allow 24 hours to pass before adjusting the

temperature to your needs.

Note: If the refrigerator has been placed in a horizontal or tilted position for any

period of time wait 24 hours before plugging the unit in.

Refrigerator Interior Shelves

To remove or replace a full-width slide-out shelf: (see fig. # 1)

1. Gently tilt the shelf up and slide forward until the shelf has been

completely removed.

2. To replace the shelf, gently slide the shelf back.

fig. # 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

No comments

Haier HC32SA42SW Use and Care Manual Page 9