Haier HWM90-96A User Manual download pdf (Page 3)

The water level sensor is bad.

Please contact the after-sales

service department.

The digitron displays E6.

Phenomena The reason How to settle

The top lid is not closed

Is the drain hose put down?

Is the drain hose blocked by

foreign material?

Are the laundries put slantingly?

Are the laundries slanting in

spinning?

Is the machine slanting?

The water tap is not open

The water inlet valve is blocked

The water pressure is too low

and the current is too small

Is there power failure?

Is the power plug loose?

Is the jointer screw of the water

inlet hose is loose or twisted

awry?

The water faucet leaks

There's abnormal sound inside the

machine

The machine does

not act

Close the top lid

Put down the drain hose. Open

and close the top lid once.

Clean the foreign material.

Open and close the top lid once.

Re-order the laundries. Close the

top lid.Level the machine in right

position.

Open and close the top lid once.

Open the water tap. Push

the "Start/Pause" button.

Clean the water inlet valve.

Push the "Start/Pause" button.

Wait for the normal water pressure

Before use.

Use it when the power is on.

Insert the power plug tightly.

Level the machine properly.

Re-order the laundries.

Fasten the jointer screw

properly.

Does the water level arrive at the

set water level?

Affusion to the set water level.

Is the power plug loose?

Insert the power plug tightly.

Is the top lid closed?

Close the top lid

Are the laundries put orderly?

Put the laundries orderly.

Not spin

Not wash

Buzzing upon reservation starts,

Nixie tube indicates "E0"

Safety switch actuates, not

spin, (after self-correction

twice), nixie tube displays

"E3",

buzzing

No or slow water filling (not

reaching the level in 40 min),

nixie tube indicates

"E4",

buzzing

No or slow drain, nixie tube

indicates

"E1"

,buzzing.

If the nozzle is choked with

foreign bodies

Remove the foreign bodies

Poor or no waterfall flow

The top cover leaves open

Close the top lid

Running pauses during spin,

nixie tube indicates

"E2",

buzzing

There may be some water flowing out of the

drain hose in the first use of the machine.

It is the water remained performance inspection

by the factory.

Common phenomena

Phenomena

Explanation

The spinning is intermittent when it starts.

The wash procedure pauses.

Select spin program, but it does not work.

Balance the laundries to avoid slanting.

The cloth sensor is detecting , it will add water

after about 48 senconds.

The program is setting the drain time , certain

period is needed before it starts spinning.

Trouble-shooting answer to question

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns

sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special

maintenance department or after-sale service department of our company. Do not repair it by yourself.

16 1

(One piece)

Bottom plate

Water inlet hose

Tapping screw

Water inlet valve

Water absorption cushion

Power cord

Top lid components

Detergent box

Control panel

Outer tub cover

Balance ring

Inner tub

Lint filter(2pieces)

Pulsator

Control panel coating

Cabinet

Liquid wahitener inlet

Adjustable leg

Rear faceplate

Honourable users:

Thank you for choosing our products.

Our products integrate high-tech, precision, frontier science .To facilitate using it,

please read this manual carefully and operate this machine according to it.

Back cover

Drain hose

Contents marked with that symbol

are related to the safety of the

product and the personal safety

of the users. Please operate in strict

conformity to the contents, otherwise

it may result in damage of the

machine or influence the personal

safety of the users.

Contents marked with that symbol

are actions forbidden to perform.

Performing of those actions may

result in damage of the machine

or influence the personal safety

of the users.

the end connecting to

the washing machine

jointer connecting the water

inlet hose and the water faucet

the end connecting to the

water inlet hose jointer

Water inlet hose jointer

Accessories

Meaning and description of the symbols

(One piece)

The figure in this manual being sketch map and with the improvement of our products, the machine you buy

is like to be different from the figure indicated in the manual .Please understand.

Before Using

Handle

Draining hose

hanging hole

Names of the parts

(Eight pieces)

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Haier HWM90-96A User Manual Page 3

Comments to this Manuals

Related products and manuals for Washing machines Haier HWM90-96A