Haier HWM90-96A User Manual download pdf (Page 4)

To prevent your laundries and washing machine from

damages, be sure to take out all of the foreign materials

from your pocket, such as coins, buttons, sandor hair

pins etc.

Before washing, please check if the water tap is open,

and if the water inlet pipe is connected properly.

It is suggested to use low-foaming washing powder.

Please keep the lint filter in good condition, and

install it to proper position during washing. If the

lint filter is lost or damaged,please contact the local

after-sales service department of our company.

Dismantle

Install

Dismantle

Install

The cover of lint filter

lint filter

The back cover of lint filter

lint filter

Safety precautions

Earth

The ventilation

holes at the bottom

Soft object

Do not let the machine share one receptacle with other

electric appliances. If the plugging into the receptacle

is loose, do not use the plug any more.

Do not wash water-proof laundries like

the raincoat, bike covers etc. to avoid

abnormal vibrations in spinning.

Please plug the power plug on special

receptacle. Be sure to use three-pins

power receptacle. Ensure that the earthing

prong of the power receptacle is earthed

reliably. Use leakage protector if possible.

Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.

Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe with

dry cloth carefully.

If the power cord or the power plug is bad, to avoid risk it is

required to have it replaced by the technicians of our

special shop or the after-sale service department.

Do not put the machine at damp place like

the bathroom. Never wash it with water. Do

not put wet laundries on the control panel.

Do not use water hotter than 50

In case the washing machine is installed on ground with

carpet, do not block the ventilation hole with carpet.

The washing machine must be positioned

so that the plug is accessible. Be sure to pull the

plug off and close the water faucet in

following cases: power failure, delivering

the machine, setting the machine idle or

cleaning the machine. Do not plug

or pull the power plug with wet hand.

Before Using

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (

about 1 hour), then close the top lid.

4.Hang up the power cord and drain hose.

3.Be sure to pull off the power plug before maintenance.

2.Do not store water in the washing machine for a long period. Drain the water completely after each using.

The filter screen of the water inlet valve is likely to be

blocked by foreign materials and influence the water

inlet.

Please clean it with brush every two months.

If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol, alcohol etc.

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence

your using the machine.

Disposal after washing

Please first pull off the power plug from the receptacle before cleaning.

Clean the detergent box and set it on

the control panel seat.

1.The method of dismantle : Push it up aslant and gently.

2.The method of install : install it upwards and aslant

and push it in .

Benzene

Using process

Please keep the lint filter in good condition, and

install it to proper position during washing. If the

lint filter is lost or damaged,please contact the local

after-sales service department of our company.

Dismantle

Install

Dismantle

Install

The cover of lint filter

lint filter

The back cover of lint filter

lint filter

Dismantle

Install

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Haier HWM90-96A User Manual Page 4

Comments to this Manuals

Related products and manuals for Washing machines Haier HWM90-96A