Haier HVFM20A User Manual download pdf (Page 8)

Wine Cooler Features And Use

Electronic Controlled Units:

Once you have plugged the unit into an electrical outlet, let the unit run for

at least 30 minutes to acclimate itself before making any adjustments.

During this time the Red Wine light may stay on.

Mechanical Controlled Units:

The control for this is on the back of the unit. There are 6 settings

plus 0 (OFF). Initially set the temperature setting to 3. Let the unit run for at

least 30 minutes to acclimate itself before making any adjustments.

Initial Setup

Electronic Control Unit: See fig. # 1

• The wine cooler is preset from the factory to automatically

accommodate temperature requirements for red or white wines.

If you store mostly white wines, press the "White Wine" button and the

wine cooler will maintain an average temperature between

45˚ to 50˚ F. Pushing the "Red Wine" button will yield an

average temperature between 55˚ to 60˚ F.

• The wine cooler can be set to any temperature you desire to

accommodate your wine storage requirements. To set the temperature,

press both the "White Wine" and "Red Wine" buttons simultaneously

and hold for approximately 3 seconds. Now you are in temperature set

mode. Decrease the temperature by pushing the "White Wine" button

and increase the temperature by pressing the "Red Wine" button.

Pressing the appropriate button 3 times will adjust the temperature 3

degrees, press 4 times equals 4 degrees, 5 times equals 5 degrees, and

so on. Once you have selected the temperature you desire, push the

"Light/Set" button. Now the wine cooler is programmed and the LED

readout will return to current internal temperature reading.

Temperature Adjustments:

English

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 42 43

No comments

Haier HVFM20A User Manual Page 8