Haier CWH08A User Manual download pdf (Page 9)

Complete Installation

1. Insert foam seal behind the top of the lower window sash and

against the glass of the upper window.

2. Use a ¹⁄₈" drill bit to drill a starter hole through the hole in the

top channel.

3. Attach top channel to window sash with one ³⁄₄" screw to

secure window in place.

4. Plug into a grounded 3 prong outlet.

5. Press RESET on the power supply cord. See “Electrical

Requirements.”

AIR CONDITIONER USE

Operating your air conditioner properly helps you to obtain the

best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

■

If you turn off the air conditioner, wait at least 3 minutes

before turning it back on. This will keep the air conditioner

from blowing a fuse or tripping a circuit breaker.

■

Do not try to operate your air conditioner in the Cool mode

when outside temperature is below 65°F (18°C). The inside

evaporator coil will freeze up, and the air conditioner will not

operate properly.

NOTE: In the event of a power failure, your air conditioner will

operate at the previous settings when the power is restored.

A. Top of lower window sash

B. Foam seal

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

No comments

Haier CWH08A User Manual Page 9