Haier HDB18EB User Manual download pdf (Page 10)

English

Check List for Wash Process

1) Make sure all items are loaded in the racks and silverware basket properly.

Note: Do not load tall dishware or cookware items near middle spray arm as

they may block the spray arm from rotating.

2) Pour the proper amount of detergent into the detergent dispenser.

Note: If "RINSE " indicator light display is "ON" indicating that it is empty,

add "Rinse Aid" agent at this time.

3) Close the door and latch properly.

4) Select the desired wash cycle by matching the knob "Pointer" to cycle "Dot".

Once you are at this point, turn the power button "ON". You will hear a "Click"

and the wash process will begin at this time.

5) To turn the power off at the end of the cycle, simply press the "POWER" button.

6) If you want to speed up the drying process after completion of the cycle, keep the

door open slightly to release the moist air.

Warning: Keep children away from the machine when the door is opened to dry

the dishware because the moist hot air exiting out of the door may

cause harm.

Canceling or Resetting Wash Cycle

Note: The dishwasher will release detergent automatically within a few minutes of

the start of a wash. To avoid the "release of detergent" before you cancel or

reset the wash cycle, you must press "POWER" button immediately.

• Once you have reset to a new wash cycle, you must refill the detergent

compartment if it is open and empty because the detergent from previous wash

cycle may have already been released.

Follow the steps below to cancel or reset a wash cycle:

1) To cancel or reset a wash cycle, press "POWER" button to "OFF" position to turn

the dishwasher off. You will notice that power indicator display light shuts off.

Note: "HI-TEMP WASH" option can not be selected with "RINSE & HOLD"

cycle.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

No comments

Haier HDB18EB User Manual Page 10