Haier HDB18EB User Manual download pdf (Page 23)

English

Dishwasher does not work:

• Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.

• Check if the unit is in "OFF" mode.

• Check if the door is open. You may need to close the door properly.

• Check that you have pressed "POWER" button after proper selection.

Dishware and glassware/flatware are cloudy

and not properly cleaned:

• Use of old or poor detergent.

You need to make sure that detergent is fresh.

• The water may be hard in your area.

You may need to install a water softener.

• Spray arms may be blocked.

You may need to rearrange dishware and utensils.

• Water pressure may be low.

You may need to adjust the water pressure.

Make sure it is between 20 to 120 (PSI).

• Water temperature may be lower than what is recommended.

(120 Degree F / 49 Degree C) You may need to adjust the water temperature on

your water heater.

• Overloading of dishware.

You may need to rearrange or remove some dishware from the load.

• (May have selected wrong cycle.) Inappropraite cycle selection.

You may need to select the proper cycle.

Dishes are not dry:

• Low water temperature.

You may need to regulate the water temperature to 120 Degree F / 49 Degree C.

• Make sure the rinse agent dispenser is filled and the proper amount is used.

• Avoid nesting and do not overload.

• Load items in a tilted position if possible so the water will run off easily.

• Dishware washed in higher temperatures will dry faster.

• Some plastic materials may need to be towel dried.

Troubleshooting

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

No comments

Haier HDB18EB User Manual Page 23