Haier HDB18EB User Manual download pdf (Page 11)

English

Pausing a Wash Cycle:

The "POWER" button serves the purpose of the "Pause" function as well as

powering the machine on or off.

If you need to pause in the middle of the cycle to add or remove any items, follow

the steps below:

1) Press "POWER" button to the "OFF" position to pause the cycle. You will notice

that the power indicator display light shuts off.

2) Open the door by squeezing the door latch slowly.

Note: Do not open the door until the water spray action stops. Be careful of

moist hot air that may rise out of the dishwasher.

3) Add or remove items. Once you have finished adding or removing, simply close

the door properly.

4) Press the "POWER" button to the "ON" position to resume the cycle. You will

notice that power indicator display light turns on.

Open Door Protection:

Your dishwasher will stop automatically if the door is opened during the operation.

The dishwasher will not start until the door is closed again. Once the door is closed

the cycle will resume automatically.

2) To reset a wash cycle, turn the knob "Clockwise" to your desired wash cycle

setting.

3) Press "POWER" button again to the "ON" position to turn the dishwasher on.

You will hear a "Click" that signifies the automatic start of the wash process. You

will also notice that power indicator display light turns on.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

No comments

Haier HDB18EB User Manual Page 11