Haier HA10TG21SS User Manual download pdf (Page 10)

LEFT/RIGHT DOOR OPENING METHOD

This product allows you to reverse the door

opening from left to right and back. You can select

your preference of door opening by following the

procedure to make the change.

TOOLS REQUIRED

Phillips and Flat Head Screwdrivers, Ratchet

Wrench with 8 mm and 10 mm sockets.

DISMANTLING

(Fig. 1 and Fig. 2)

1. Affix refrigerator and freezer door by sticking

adhesive tape on both sides to hold doors in

place.

2. As shown in Fig. 1, remove the upper hinge

cover by using flat head screwdriver. Then

remove three screws using ratchet wrench

with 10 mm head. Take out hinge by pulling it

vertically and keep it in safe place.

3. Remove the adhesive tape on freezer door, lift it

and take off the door and carefully put it aside.

4. Remove two screws of central hinge using

ratchet wrench with 8 mm socket, and keep

them in a safe place (Fig. 2)

5. Remove the adhesive tape on refrigerator door,

lift it and take refrigerator door, and carefully

put it aside.

6. Remove the doorstoppers from the refrigerator

and freezer doors. (Fig. 3)

7. Insert left side doorstoppers (provided in your

packing) on the left side bottom hole of the

refrigerator door and on the left side bottom

hole of the freezer door. Fasten with screws

provided. (Fig. 4)

REVERSING THE DOOR SWING

PAGE 8 • SET UP & USE

ENGLISH

Fig. 1 Fig. 2

Fig. 3

Fig. 4

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

No comments

Haier HA10TG21SS User Manual Page 10