Haier HEATED AIR SPRAY PACKAGE 237410 User Manual download pdf (Page 6)

III.

Unpacking the System

In addition to the assembled unit, these components

are packed loosely or separately: suction assembly,

hose set, gun, instruction manuals. These are the

manuals you should receive:

308-I 94

Husky 307 pump

307-452

Air spray gun

308-325 Fluid regulator

307-805 Fluid heater

307-273 Fluid filter

IV.

Connecting the Hose Set and Gun to

the System See Fig. I.

To fluid filter (45) outlet

To gun air regulator (6b) outlet

To needle valve (5) adapter (25)

Fig. 2

Connect the air hose (54b) between the gun air

regulator (6b) and the air inlet of the spray gun (2).

This is a WI-18 swivel fitting.

Connect one fluid hose (54b) to the fluid filter (45)

outlet. Connect the other fluid hose (54b) to the

needle valve (5) adapter (25). The hose has a

1/4-l

8 swivel fitting.

Connect the whip hose (10) to the fluid inlet of the

spray gun (2).

4. Verify that all fittings throughout the system are

tightened securely.

Use a tie strap (58) to secure the hose set to the

leg of the cart. This provides strain relief so that

tugs on the heavy hoses don’t damage the hose

connections.

Grounding the System

To reduce the risk of static sparking, ground the

pump and all other equipment used or located in

the spray area. Check your local electrical code for

detailed grounding instructions for your area and

type of equipment. Ground all of this equipment.

Also read FIRE OR EXPLOSION HAZARD on

page 2.

Pump: One end of the ground wire (43) is already

connected to the pump grounding strip. Connect

the clamp end of the ground wire to a true earth

ground.

Heater: Plug into a properly grounded electrical

outlet. If you use an extension cord, be sure it is a

3-wire grounded cord that is properly sized for the

heater.

Air compressor. Follow manufacturer’s

recommendations.

Object being sprayed: Follow local code.

Fluid supply container: Follow local code.

All solvent pails: Follow local code. Use only metal

pails, which are conductive. Do not place the pail

on a non-conductive surface, such as paper or

cardboard, which interrupts the grounding continu-

ity.

308-448 5

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Comments to this Manuals

No comments

Haier HEATED AIR SPRAY PACKAGE 237410 User Manual Page 6

Comments to this Manuals

Related products and manuals for Tools Haier HEATED AIR SPRAY PACKAGE 237410