Haier HT18TS45SW User Manual download pdf (Page 10)

DOOR HANDLE INSTALLATION

For refrigerators with a mounting screw installed

on the face of both doors:

Remove both handles from inside freezer

compartment and screws from parts-included

bag.

FREEZER DOOR HANDLE

1. Place the tapered end of the handle over the

mounting screw on the freezer door and gently

slide handle in the direction of the flat end of

the handle. (Fig. 1)

2. Once the handle is fully seated around the

mounting screw, slowly rotate the flat end of

the handle toward the bottom of the freezer

door.

3. Open the freezer door and install the screws

into the underside of the freezer door through

the flat end of the handle. Do not use power

tools to install screws. Do not over-tighten the

screws.

REFRIGERATOR DOOR HANDLE

1. Place the tapered end of the handle over the

mounting screw on the refrigerator door and

gently slide handle in the direction of the flat

end of the handle. (Fig. 1)

2. Once the handle is fully seated around the

mounting screw, slowly rotate the flat end of

the handle toward the top of the refrigerator

door. (Fig. 1)

3. Open the refrigerator door and install

the screws in to the top of the refrigerator

door through the flat end of the handle

Do not over-tighten screws. (Fig. 2)

4. If re-installing handles after reversing the

door swing, remove screw hole plug from

the parts-included bag and place it in the

handle-mounting screw hole on the face of the

refrigerator door.

5. The name badge can be removed by using a

putty knife or flat head screwdriver to pry the

badge off the door face, being careful not to

damage the finish. Any residue left on the face

of the door from the badge should be removed

by using Goo Gone

©

or WD-40

©

. Be sure to

follow the manufacturer’s instructions when

using these products.

Do not use any abrasives or scouring pads to

remove the residue.

An extra logo badge is provided in the parts-

included bag with your refrigerator. That badge

can be used to cover the handle mounting screw

hole on the face of the freezer door.

DOOR HANDLE INSTALLATION

PAGE 8 • SET UP & USE

ENGLISH

Fig. 1

Fig. 2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

Comments to this Manuals

No comments