Haier Dishwasher DW12-TFE2 User Manual download pdf (Page 16)

Washing dishes

Programme selection

The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as

well as the amount and condition of food remains, with the details contained in the wash cycle table.The

corresponding programme sequence, duration and consumption details are shown in the right half of the

overview. For example:

Use the« normal» programme for dishes and utensils which have plenty of food remains stuck on hard.

Earn savings

If only a small number of dishes have been loaded into the dishwasher,selecting a programme that

operates at the next lowest temperature which should be sufficient.

Programme data

The stated programme data are based on standard operating conditions. The values can vary consider-

ably according to:

different amounts of dishes

temperature of mains water supply

pressure of mains water supply

ambient temperature

fluctuations in mains voltage

machine-related factors (e.g. temperature, water volume,...)

Switching the dishwasher ON

Turn on the tap.

Close the door after loading the appliance

Set On-Off button “B” to On. The state indicator "A" light.

Rotate the knob to select programme you wish.

(DW12-TFE3 series: The time-remaining indicator display

the time of the programme you selected.)

After 3 seconds the appliance emits a short warning signal,

and start the programme, the state indicator "A" blinks .

Warning

When the dishwasher power on, the programme which the knob indicated

can not be carried out, you must Rotate the knob to another programme

and then back to it.

DW12-TFE3 Series

DW12-TFE2 Series

DW12-TFE1 Series

1 ... 15 16 17 ... 53

No comments

Haier Dishwasher DW12-TFE2 User Manual Page 16