Haier ESA412K User Manual download pdf (Page 87)

(1) Install insulation for the drain pipe.(See Fig.12 and 13)

Cut the included insulation material to an appropriate size and adhere it to the pipe.

Insulation for Drain pipe

(To be obtained locally.Length

shoud be at least 8mm)

Indoor unit(drain port)

Drain pipe insulation

Drain pipe

Indoor unit

No gap

10mm or over

Drain pipe

Drain pipe insulation

(2) If "Right rear piping ":fasten the drain pipe with VT wires so that the pipe slopes

Fig. 12

Fig. 13

ELECTRICAL WIRING

HOW TO CONNECT WIRING TO THE TERMINALS

(1)Cut the wire and with a wire cutter or wire-cutting pliers,then strip the insulation to about 15/16"(25mm)

of expose the solid wire.

(2)Using a screwdriver ,remove the terminal screw(s) on the terminal board.

(3)Using pliers,bend the solid wire to form a loop suitable for the terminal screw.

B.For strand wiring

(1)Cut the wire and with a wire cutter or wire-cutting pliers,then strip the insulation to about 3/8"(10mm)

of expose the solid wire.

(2)Using a screwdriver ,remove the terminal screw(s) on the terminal board.

A.For solid core wiring (or F-cable)

Indoor unit (rear view)

VT wire

Drain hose

Fig. 14

>a__WcU[S^ <[c >a`V[e[a`Wc

correctly within

the indoor unit.

-87-

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 258 259

No comments

Haier ESA412K User Manual Page 87