Haier ESA412K User Manual download pdf (Page 89)

(1) Remove the cord clamp.

(2) Put the end of the connection cords to the positions shown in Fig.20.

(3) Connect the end of the connection cord fully into the terminal block.

(4) Fasten the connection cord with a cord clamp.

(5) Fasten the end of the connection cord with the screw.

(6) For series 28,36,42,52, the power cable and connecting cable are self-provided.

FRESH-AIR INTAKE

(1)Take away the knockout hole for the fresh-air intake,as shown in Fig.17.(If using half-concealed

installation ,take down the top knockout hole instead)

CAUTION

(1)When removing the cabinet(iron plate),be careful not to damage the indoor unit

internal parts and surrounding area(outer case).

(2)When processing the cabinet(iron plate),be careful not to injury yourself with

burrs,etc.

(2)Fasten the round flange (optional) to the fresh air intake,as shown in Fig.18.(If using half-concealed

installation, attach to the top.)

[After completing "INDOOR UNIT INSTALLATION"....]

(3)Connect the duct to the round flange.

(4)Seal with a band and vinyl tape,etc.so that air does not leak from the connection.

Duct

Fig. 17

Fig. 18

Fig. 19

For half-concealed

Round duct (option parts)

CONNECTION CORDS

>a__WcU[S^ <[c >a`V[e[a`Wc

-89-

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 258 259

No comments

Haier ESA412K User Manual Page 89