Haier DW-7777-01 User Manual download pdf (Page 9)

English

It is the customer’s responsibility to contact a qualified electrician to ensure that

the electrical installation is adequate and conforms with all national and local

codes and ordinances.

You must have:

• 120-volt, 60Hz, AC-only, 15- or 20-amp.,fused electrical supply.

• COPPER WIRE ONLY.

We recommend:

• A time-delay fuse or circuit breaker.

• A separate circuit.

IF DIRECT-WIRING DISHWASHER

• Use flexible, armored or non-metallic sheathed copper

wire with grounding wire that meets the wiring

requirements for your home and local codes

and ordinances.

• Use strain relief method provided with house wiring

junction box or install a UL-listed/CSA-certified clamp connector to the house

wiring junction box. If using conduit, use a UL-listed/CSA-certified conduit

connector.

IF CONNECTING DISHWASHER WITH A POWER SUPPLY CORD

• Use a UL-listed, 16-gauge, three-conductor

power supply cord that meets

all local codes and ordinances. Maximum

length of the power supply cord is

6 feet (1.8m).

• A clamp connector to fit a ” (2.2cm)

diameter hole is required to secure power

supply cord to dishwasher terminal box.

• Power supply cord must plug into a mating

three-prong, grounded outlet located in the

cabinet next to the dishwasher opening.

Outlet must meet all local codes and

ordinances.

ELECTRICAL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 83 84

No comments

Haier DW-7777-01 User Manual Page 9